Do you take the old door away?

Yes. Removal and off-site disposal of the old panels, tracks, springs, cables and hardware is part of every installation, and it leaves with the crew the same visit. There is nothing for you to coordinate or store.

How long does a garage door installation take?

Most installs in the Windermere to Ocoee corridor are completed in a single service window, provided the opening dimensions and door specification were confirmed in advance. Larger custom and commercial doors can run longer.

Do I need a permit for a new garage door in Windermere?

Orange County lists exterior doors, including garage doors, as permit work, and replacement doors carry a wind-load rating requirement. We build to that standard and confirm it before the job closes.

Do I need to know my door's specs before calling?

No. We measure the opening on site, assess the load, and walk you through the options before anything is ordered.

Is Fair Garage Repair a single contractor or a dispatch network?

One licensed contractor. License #93-2002026 covers every job we take, so you get the same team and the same standard on every visit, which matters when a door has a history we need to know.

Can you install a door you did not supply?

Ask us on the call. What matters is that the spring system can be matched to the panel weight and that the hardware meets the wind-load rating for the opening.

Garage Door Installation in Windermere, FL

Old door out and hauled away. New system balanced, tested and built to code.

Call (689) 407-8963 Get a free quote

Close view of gloved hands fitting a sectional garage door panel into a metal track on a sunlit residential driveway, palm trees and a Florida ranch-style home visible in the background

FL license #93-2002026
Full removal and off-site disposal included
Wind-load requirements confirmed before sign-off
Most installs finish in one service window

What an installation actually includes

A new door is an engineered fit, not a panel swap. Every job covers the whole system.

New insulated double-car garage door on a pale stucco two-car garage in a sunny Florida suburban neighborhood, with a manicured lawn and palm tree visible

Removal and disposal

The old panels, tracks, springs, cables and hardware come off the wall and leave with the crew. Nothing gets carried over into the new system.

Spring matched to door weight

Spring type, length and tension calculated for the panel you are actually getting. An estimated setting is what wears an opener out early.

Spring work

New track, cables and rollers

Fitted with the system, aligned to the opening, torqued to manufacturer spec.

Rollers

Three-step close

Hardware check, hand balance check, then a power test with travel limits and the auto-reverse sensors. The job is not done until it passes all three.

Sensor and safety check

Permit-ready to Orange County code

Replacement doors here carry wind-load requirements, and Orange County lists garage doors as permit work for residential properties. We confirm the rating before the job closes.

Permit guide

Why a balance test decides the whole job

Disconnect the opener, lift the door to mid travel by hand and let go. A correctly sprung door stays where you put it. One that drops or rises is fighting its springs, and the opener spends the rest of its life making up the difference.

That is the test that separates an install from a delivery. Spring tension has to match the weight of the panel that is actually going on the wall, which is why insulated and custom doors are not interchangeable with the hardware that came off. DASMA, the industry standards body sets the technical standards these systems are built and tested to.

Builder-grade hardware is specified to meet minimum code, not to last. By the time most Windermere homeowners call, the door is louder, slower and working against the opener every morning.

What Central Florida does to a builder-grade door

Most of the housing stock in 34786 went up fast through the late 1990s and early 2000s. The doors that came with those homes were specified for a national average, not for two decades of Central Florida heat.

Panels expand and contract daily through summer. That thermal cycling works the hardware loose, and springs and rollers absorb the cost of every cycle. It is the same pattern behind heat and humidity damage on doors across the area.

Wind load is the other half. Replacement doors in Orange County carry a rating requirement, which is structural code tied to hurricane season, not paperwork. The Florida Building Code sets the baseline the county enforces.

A faded, oxidized white steel garage door on an older Florida ranch-style home in afternoon light, showing sun damage, chalky paint, and rust staining typical of Central Florida climate wear

How an installation day runs

Same sequence every time, and nothing gets ordered or cut before the measurements are confirmed on site.

Measure and assess
Opening width and height, header clearance, side room for the track, and the existing spring type, cable routing and opener mount position all get documented before anything is ordered.
Old system out
Panels, tracks, springs, cables and rollers come off, and the whole lot leaves the property with the crew. Spring tension is released safely before any cable work starts.
New system in
Track set to the opening and checked for level and square, sections assembled in sequence, springs tensioned to the door's actual weight, cables routed and secured, rollers fitted.
Test before sign-off
Hand balance test first with the opener disconnected, then the opener reconnected, travel limits set and the auto-reverse safety sensors tested.

Our installation standards

The same threshold on every job, residential or commercial.

Existing door system fully extracted before new work begins, off-site disposal on us
Spring tension calculated for the specific panel weight, not estimated
Torsion or extension system selected on opening height and door mass
Tracks, cables and rollers fitted new with the system
All fasteners torqued to manufacturer specification
Wind-load requirements confirmed before the job is called complete

Every install is covered by one license, #93-2002026. You can verify it with the Florida DBPR before you book.

Call (689) 407-8963

Where we work

Windermere, FL 34786

Primary service zone, Orange County. Not sure whether you are inside the radius? Call (689) 407-8963 and ask.

Windermere 34786
Winter Garden
Ocoee
Bay Hill
Gotha
Apopka
Clermont
Maitland
Kissimmee
Pine Hills
Orlando
Oak Ridge

Repair cost guide Repair or replace Heat and humidity damage Orange County permits

Questions we get before an install

Do you take the old door away?

Yes. Removal and off-site disposal of the old panels, tracks, springs, cables and hardware is part of every installation, and it leaves with the crew the same visit. There is nothing for you to coordinate or store.
How long does a garage door installation take?

Most installs in the Windermere to Ocoee corridor are completed in a single service window, provided the opening dimensions and door specification were confirmed in advance. Larger custom and commercial doors can run longer.
Do I need a permit for a new garage door in Windermere?

Orange County lists exterior doors, including garage doors, as permit work, and replacement doors carry a wind-load rating requirement. We build to that standard and confirm it before the job closes.
Do I need to know my door's specs before calling?

No. We measure the opening on site, assess the load, and walk you through the options before anything is ordered.
Is Fair Garage Repair a single contractor or a dispatch network?

One licensed contractor. License #93-2002026 covers every job we take, so you get the same team and the same standard on every visit, which matters when a door has a history we need to know.
Can you install a door you did not supply?

Ask us on the call. What matters is that the spring system can be matched to the panel weight and that the hardware meets the wind-load rating for the opening.